Pumping equipment NEFTEMAS - SAPKON ND4ML, PCM, FSJ, etc.

Pumping units are designed for volumetric dosing of neutral, aggressive liquids with a kinematic viscosity of no more than 8x10-4 m2 /s and having solid non-abrasive inclusions with maximum dimensions up to 0.1 mm, the maximum mass concentration of which does not exceed 0.2%. Application: dosing of chemicals in the chemical industry, oil refining, as well as in chemical water treatment processes at CHP, nuclear power plants and drinking water stations of the vodokanal.
Models: ND4ML, ND5ML, ND1P, ND3P, ND1M, ND3M, ND1MN, ND2MN, ND3MN, ND4M, ND4MN, ND4P, ND5M, ND6M, ND5MN, ND6MN, ND5P, ND6P, ND6PG.

• Electric pump units. Technical specifications.

8 UND block boxes are designed for proportional odoring of the product flow. Odorization is carried out by feeding microdoses of a mixture of natural mercaptans or an analog into a stream of liquefied petroleum gas (LPG) or methanol. ASO regulates the degree of odorization of the product by changing the performance of the dosing pumps depending on the flow rate of the pumped product. Functionally, the ASO consists of an odorization unit, a measurement unit, a control unit and a neutralization unit.

• Block boxes. Technical specifications.

Pulsation dampers KG, KGF are designed to accumulate and release the energy of the working fluid through gas compression. A fluoroplastic membrane is used as a separator of the working fluid. Compensators are components for metering electric pump units that do not cause chemical destruction of the flow part.

• Pulsation dampers. Technical specifications.

Safety valves of the PCM type are designed to protect devices and elements of hydraulic systems from destruction in case of emergency overpressure. Within the limits of their characteristics, the valves can be used for systems with toxic, aggressive, flammable and flammable liquids with a temperature from 233K (minus 400C) to 383K (+1100C) and a kinematic viscosity of no more than 8x10-4 m2/s (8 cm2/s) that do not have solid inclusions that do not cause chemical destruction of materials the flow part is made of steels.
Models: PCM 6-50, 6-100, 6-160, 6-250, 9-50, 9-100, 9-160, 15-50, 15-100.

• Safety valves. Technical specifications.

Metering units are designed to inject odorant into the gas flow in proportion to its flow rate. The installation is available in climatic versions U and UHL, placement category 1, 2, 3 according to GOST 15150-69. The explosion-proof installation can be operated in explosive and fire-hazardous areas, indoor and outdoor installations where the formation of explosive mixtures of gases and vapors with air belonging to Class 1, 2, category of explosive mixture IIB, with temperature group T1, T2, T3, T4 according to GOST R 51330.9-99 is possible. The installation has a built-in microcomputer that controls all operating modes, performs system diagnostics and provides information about the nature of the fault.
Models: UD2/16, UND11ML12/16, UND1ML, UND11M, UND11P, UND1M, UND1P.

• Dosing units. Technical specifications.

Catalog

Questionnaire